The Lowa Seeker GTX boot features a modern trekking look with the upper material consisting of robust and breathable full grain cowhide leather and the textile material Cordura®, which is particularly wear-resistant, tear-resistant and shape-retaining.
A steel toe cap protects the wearer against impact and pressure loadings and at the same time offers enough room for the toes thanks to its ergonomic shape. Penetration protection is provided to by a midsole made of corrosion-resistant stainless steel.
The Seeker features a high level of slip resistance thanks to its double-density profile LOWA ATC 2000 sole. The outsole is antistatic, abrasion-resistant, heat-resistant up to approx. 200° C & for short periods to 300° C and flexible at cold temperatures to approx. -20° C.
This Lowa boot features:
Upper: cowhide leather, synthetic,cordura
Lacing: open hooks
Lining: GORE-TEX® performance footwear
Sole: Rubber/PU sole LOWA ATC 2000
Toe cap: Steel
Penetration Resistance: Steel midsole
Certified safety boot: according to: EN ISO 20345 S3 SRC, form S3
The most comfortable high legs boots I have ever worn. Within a week they had already paid for themselves in comfort. Knock the socks off the other boots issued by the ambulance service. (Posted on 04/08/2018)
Try the boots on at the end of your working day as your feet could have increased by up to half a size due to vigorous activity.
Always wear your chosen socks when trying on footwear.
Please remember that LOWA boots are available in half sizes.
Fit the larger foot first but leave it unlaced. Push your foot as far forward in the boot as possible; you are now looking for a gap of approx 10mm in the space now left behind the heel.
Put the other boot on and lace them both up with your heel well back into the heel counters. They should feel snug around the ball and instep of your feet without having to lace them too tightly.
Walk up and down and experience slight heel lift only, and minimum foot slippage. You should not feel the front of the boot at all, even when trying to push your foot forward inside the boot.
Boots may become a little wider in time (but do not rely on this when purchasing).
All boots, however comfy they feel from new, need a little time to soften up.
Length difference from full size to full size = 8.46 mm (half size to next size = 4.23 mm).
Ball of the foot width increases max 3 mm from full size to next full size (half size to next size = max 1.5mm).
Wide Fitting Last
If choosing a wide fitting boot then the following width dimensions are added to the standard width: Ball of the foot width increases 2 mm on each size. Toe volume and instep height increases also.
If using your foot length as your guide (choose your longest foot), then add 10 mm before converting to UK size, to allow adequate length inside the boot. This is classed as the Mondopoint measuring system.
We use SagePay to securely process all payments, they are industry leaders and offer the highest level of card data security. We are also fully PCI compliant so you can always be confident that your details are safe.